HIVI W12 Kevlar Paper composite cone woofer

HIVI W12 Kevlar Paper composite cone woofer

Name: HIVI W12 Kevlar Paper composite cone woofer
Brand: HIVI
SKU: PROD234
Price: 235 EUR
Availability: InStock

Reference PROD234

In stock 7 pcs.

In Stock

€ 235.00

Tax included

HIVI W12

-Kevlar Reinforced paper composite cone
-Optimized-loss Santoprene? Surround with low mechanical memory
-CNC machined magnet structure parts for maximum precision
-High power handling 3 inch voice coil with black anodized aluminum former
-Vented pole piece
-High density aluminum die-cast frame with multiple point mounting
-Symmetric Motor Drive (SMD) technology

Quantity	Unit discount	You Save
3	16%	€ 112.80
5	25%	€ 293.75

(0)

12" | 8 Ω | 150

Product information HIVI W12

The design of the W12 driver is based upon the benefits of an extended pole piece in a magnet system. But here we went further. Using Finite Element Analysis simulation, we optimized the complete magnet structure and specifically shaped the pole piece to achieve symmetric flux distribution along the travel path of the voice coil. This design approach provides better driving force linearity. It considerably reduces voice coil inductance modulation and DC offset of the moving system at high power levels. The result is much less distortion and more effective voice coil cooling.

The cone is a paper composite reinforced with Kevlar fibers to insure proper dynamic stability and stiffness. The cone has a flat peripheral edge to provide structural dynamic stability in the crucial upper bass region. The surround is Santoprene?, which has a low mechanical memory, providing for more accurate transient response. The large voice coil, high Xmax, and vented pole piece allow for clear and resolving performance without mechanical or thermal compression even at the highest output levels.

The massive aluminum die-cast frame with multiple point mounting has been developed to minimize parasitic structural resonance. The W12 is an outstanding woofer for top quality speaker systems and subwoofers. It is optimized for medium to large size vented cabinets. The W12 is designed to achieve ultimate low bass reproduction where the designer is not restricted by cabinet size or where active amplification is available.

Recommended maximum crossover frequency is 300-800 Hz.

Specifications

Nominal Impedance (Z)(Ω) :		8
Resonance Frequency (Fs)(Hz) :		28
Nominal Power Handling (Pnom)(W) :		150
Max Power Handling (Pmax)(W) :		300
Sensitivity (2.83v/1m)(dB) :		90
Weight (M)(Kg) :		6.3
VC Diameter (mm) :		76
DC (Re)(Ω) :		6.5
VC Length (H)(mm) :		22.0
VC Former :		SV
VC Frame :		Kapton
Magnet System :		Outside
Magnet Former :		Ferrite
Force Factor (BL)(N/A) :		14.1
Gap Height (He)(mm) :		8.0
Linear Excursion (Xmax)(mm) :		7.0
Suspension Compliance (Cms)(uM/N) :		378
Mechanical Q (Qms) :		2.16
Electrical Q (Qes) :		0.52
Total Q (Qts) :		0.42
Moving Mass (Mms)(g) :		89.7
Effective Piston Area (Sd)(m2) :		0.0539
Equivalent Air Volume (Vas)(L) :		156.0
Cabinet Type :		Sealed
Recommended Box Volume(Vb)(L) :		75
-3dB Cut-Off Frequency(F3)(Hz) :		48

Diameter: 12"
Impedance: 8 Ω
Power: 150
Series: HIVI W
Material: Aluminum
Kevlar
Paper