Plate amplifiers

Hypex FA251 FUSION AMP Hypex FA251 FUSION AMP 2
250 W
Pre-order product
Plate amplifiers

Hypex FA251 FUSION AMP

PROD625
0 pcs.
BGN 686.00
Product information "FusionAmp FA251" This FusionAmp can be the basis of e.g. a powerful active subwoofer or a one-way monitor. The FA251 has one powerful 250 Wrms Ncore® amplifier.  Connections Analogue balanced XLR in and through Analogue unbalanced RCA input High level input USB 2.0 configuration interface Features 15 biquads per amplifier Three...
HYPEX FUSIONAMP FA123 Plate NCore Amplifier 2x125W + 1x100W DSP ADAU1450 DAC AK4454 192kHz HYPEX FUSIONAMP FA123 Plate NCore Amplifier 2x125W + 1x100W DSP ADAU1450 DAC AK4454 192kHz 2
2х125+1х100W
Pre-order product
Plate amplifiers

HYPEX FUSIONAMP FA123 Plate NCore Amplifier 2x125W + 1x100W DSP ADAU1450 DAC AK4454 192kHz

PROD625
0 pcs.
BGN 980.00
The Hypex FusionAMP FA123 plate amplifier can be used to design a two- or three-way active speaker. It is based on two NCore modules capable of developing 2x125W RMS which can also be bridged to form a 1x250W amplifier. There is also a third NCore amplifier delivering 1x100W RMS for a tweeter.
Hypex FA253 FUSION AMP Hypex FA253 FUSION AMP 2
2х250+1х100W
Pre-order product
Plate amplifiers

Plate NCore Amplifier 2x250W + 1x100W DSP ADAU1452 DAC AK4454 192kHz

PROD625
0 pcs.
BGN 1,268.00
The Hypex Fusion AMP FA253 plate amplifier can be used to design a two- or three-way active speaker. It is based on two NCore modules capable of developing 2x250W RMS which can also be bridged to form a 1x500W amplifier. There is also a third NCore amplifier delivering 1x100W RMS for a tweeter. This high power allows it to accompany speakers that need a...
MONACOR SAM-300D Active Subwoofer Modules MONACOR SAM-300D Active Subwoofer Modules 2
300 W
In Stock
Plate amplifiers

MONACOR SAM-300D Active Subwoofer Modules

PROD638
1 pcs.
BGN 490.00
SAM-300D Active Subwoofer Modules Peak output power 420 W Power rating 300 W Power rating at 4 Ω 300 W Power rating at 8 Ω 150 W Channels 1 Inputs max. 7 V/22 kΩ Attenuation factor 24.4 Frequency range 20 Hz - (var. 40-200 Hz) Crossover network 18 dB/oct. S/N ratio > 70 dB THD < 0.1% Mains voltage ~ 230 V Mains frequency 50 Hz Power consumption,...
Exproject SA-45
40 W
In Stock
Plate amplifiers

Exproject SA-45

PROD631
4 pcs.
BGN 109.00
Built-in amplifier SA-45 Technical parameters Amplifier to be built into a subwoofer Rated power (RMS): 40W (8 ohm) TDA7265 Maximum power: 70 W Minimum load: 6 Ohm Frequency range: 20 – 250 Hz Inputs: L/R , SUB Power supply: AC 220-240 V, 50/60 Hz - Impulse Adjustments: CROSSOVER, VOLUME, PHASE Phase correction: 0°-180° adjustable Installation...
Exproject SA-90 Exproject SA-90 2
90 W
In Stock
Plate amplifiers

Exproject SA-90

PROD633
2 pcs.
BGN 159.00
SA-90 built-in amplifier Technical parameters Nominal power (RMS): 60W (8 ohm) 2SD1047+2SC817 – 2 pcs. Maximum power: 90 W Frequency range: 20 – 250 Hz Inputs: L/R, SUB Power supply: AC 220-240 V, 50/60 Hz - Transformer (included) Adjustments: CROSSOVER, VOLUME, PHASE Phase correction: 0°-180° adjustable Installation dimensions: 180 x 180 mm
Exproject SA-500 Active Subwoofer Modules Exproject SA-500 Active Subwoofer Modules 2
500 W
In Stock
Plate amplifiers

Exproject SA-500 Active Subwoofer Modules

PROD632
1 pcs.
BGN 590.00
Amplifier to be built into a subwoofer Parameters Rated power (RMS): 500W (8 ohm) Maximum power: 1000W (8 ohm) Speaker load rating: 8 Ohm Frequency range: 20 – 250 Hz Inputs: 2RCA, 2 x 6.3mm Outputs: 2RCA, 2xXLR, 2xSPEAKER OUT L / R 4 - 8 ohm (speakon) Power supply: AC 115-230 V, 50/60 Hz - Transformer Adjustments: CROSSOWER 80 Hz – 1 kHz, SUB volume,...
Hypex Hypex Remote Control Hypex Hypex Remote Control 2
In Stock
Plate amplifiers

Hypex Hypex Remote Control

PROD627
3 pcs.
BGN 26.00
Product information "Hypex Remote control" Refine your listening comfort with the Hypex Remote Control - the ideal accessory for your Fusion Amplifier setup, perfectly compatible with the Fusion Remote kit or Fusion OLED Display. You can also find this remote included in the DIY PreAmplifier kit.
Hypex Fusion Remote Kit Hypex Fusion Remote Kit 2
In Stock
Plate amplifiers

Hypex Fusion Remote Kit

PROD626
3 pcs.
BGN 52.00
All models of the FusionAmp range can be extended with this Fusion Remote Kit. This set contains a PCBA with IR receiver and bi-colour LED, a plexiglas front with double adhesive tape, 2 lightpipes ,the necessary cable (125cm) and screws. You can mount this kit from the inside or outside of the speaker cabinet.
Filter by
Manufacturers
Price
BGN BGN
Impedance
Filter
Product added to wishlist
Product added to compare.

This website use cookies. Click here for more information.