Resistors

Mundorf M-Resist 10w Mundorf M-Resist 10w 2
In Stock
Resistors

Mundorf M-Resist 10w

PROD416
0 Review(s)
2 pcs.
€ 3.48
View
MResist Classic- Mundorf MREC10 MResist Classic- Mundorf MREC10 2
In Stock
Resistors

MResist Classic- Mundorf MREC10

PROD415
0 Review(s)
10+ pcs.
€ 9.99
MREC 10 resistors are similar but slightly simpler built than our MResist Supreme resistors. In fact, the MREC 10 series is to close the gap between ordinary 10W MOX resistors and our noble 20W MResist SUPREME series. However, MREC 10 resistors share the essential features of the advanced SUPREME series , except the (expensive) bifilar winding.
View
Mundorf M Resist Supreme 20W - Audiophile Resistors Mundorf M Resist Supreme 20W - Audiophile Resistors 2
In Stock
Resistors

Mundorf M Resist Supreme 20W - Audiophile Resistors

2 Review(s)
8 pcs.
€ 24.90
Product description With our MResist SUPREME you can enjoy even finest details and spatial information which normally get lost. Due to the complex bifilar structure from 1Ω with two wires being wound around the high-temperature-resistant cement element simultaneously the inductance is always below 75µH.   Highlights Extremely low temperature...
View
Mundorf MRESIST ULTRA 330W ±30PPMK Mundorf MRESIST ULTRA 330W ±30PPMK 2
In Stock
Resistors

Mundorf MRESIST ULTRA 330W ±30PPMK

PROD407
0 Review(s)
10+ pcs.
€ 29.65
The development of our MRes Ultra Resistor is based on the well-known good tonal properties of copper-manganin foil. Compared to all wound-wire resistors, this film provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore...
View
MRESIST ULTRA HEATSINK SET 1 MRESIST ULTRA HEATSINK SET 1 2
In Stock
Resistors

MRESIST ULTRA HEATSINK SET 1

PROD419
0 Review(s)
10+ pcs.
€ 9.00
Mundorf M-reu30-cool for M-Resist Ultra MREU30 30W Price for the set 1 with red heat sink, mounting pad, screw, self-holding nut,item no: M-reu-cool-RD1  Attributes Wärme-Widerstand 6,5 KelvinWatt Wattage 1x15 Watt Dimensions L42,0xH38,1xZ25,0 mm Hole Diameter @ Pitch Ø2,3 | RM25,4 mm Color rot Item No.MREU-COOL.RD1
MRESIST ULTRA HEATSINK SET MREU-COOL.RD2 MRESIST ULTRA HEATSINK SET MREU-COOL.RD2 2
In Stock
Resistors

MRESIST ULTRA HEATSINK SET 2

0 Review(s)
10 pcs.
€ 10.02
Attributes Item No.MREU-COOL.RD2 Wärme-Widerstand 6,5 KelvinWatt Wattage 2x7,5 Watt Dimensions L42,0xH38,1xZ25,0 mm Hole Diameter @ Pitch Ø2,3 | RM25,4 mm Color rot
Mundorf M-Resist High Load 25W Mundorf M-Resist High Load 25W 2
In Stock
Resistors

Mundorf M-Resist High Load 25W

PROD417
0 Review(s)
10+ pcs.
€ 1.99
Attributes Resistance 1,0 Ohm ±5 % Wattage 25 Watt Dimensions L60xH13xZ15 mm Connectors Ø0,80xL35 mm Temperature Coefficient ±300 ppm/°C Inductivity 0,58 µH Dielectric Strength 800 Volt AC Temperature range -30°C/-22°F...+220°C/+428°F Conductor Material Copper-nickel wire Core| Potting Ceramics| Cement
View
Mundorf M-Resist 5w Mundorf M-Resist 5w 2
In Stock
Resistors

Mundorf M-Resist 5w

PROD418
0 Review(s)
10 pcs.
€ 1.79
View
Monacor LSR 10w High-power cement resistor Monacor LSR 10w High-power cement resistor 2
Product available with different options
Resistors

Monacor LSR 10w High-power cement resistor

PROD410
0 Review(s)
0 pcs.
€ 1.53
High-power cement resistor, 10 W Resistor for use in crossover networks, especially for PA and top hi-fi applications, also to be connected as load resistors. SPECIFICATIONS Description High-performance cement resistor Nominal value 10 Ω Power rating 10 W Packing unit 1 Weight 9 g
View
Monacor LP-100-8 L-pad attenuator Monacor LP-100-8 L-pad attenuator 2
Temporarily out of stock
Resistors

Monacor LP-100-8 L-pad attenuator

PROD409
0 Review(s)
0 pcs.
€ 17.90
Technical specifications LP-100-8 LP-100-8 Impedance 8 Ω ± 25% Channels mono Attenuation 0 dB to ∞ dB Attenuation direction counterclockwise Turning angle 300° ± 5° Power rating 15 W MAX Admiss. ambient temp. 0-40 °C Weight 54 g
View
Monacor AT-62SK L-pad attenuator Monacor AT-62SK L-pad attenuator 2
Temporarily out of stock
Resistors

Monacor AT-62SK L-pad attenuator

PROD408
0 Review(s)
0 pcs.
€ 30.68
Technical specifications AT-62SK AT-62SK Impedance 8 Ω ± 20% Channels mono Attenuation 0 dB to ∞ dB Attenuation direction counterclockwise Turning angle 300° ± 5° Power rating 100 W MAX Admiss. ambient temp. 0-40 °C Weight 127 g
View
Speaker L-Pad Attenuator 15W Mono 1" Shaft 8 Ohm Speaker L-Pad Attenuator 15W Mono 1" Shaft 8 Ohm 2
In Stock
Resistors

Speaker L-Pad Attenuator 15W Mono 1" Shaft 8 Ohm

PROD409
0 Review(s)
2 pcs.
€ 14.83
Technical specifications  Impedance 8 Ω ± 25% Channels mono Attenuation 0 dB to ∞ dB Attenuation direction counterclockwise Turning angle 300° ± 5° Power rating 15 W MAX Admiss. ambient temp. 0-40 °C Weight 54 g
Speaker L-Pad Attenuator 100W Mono 1" Shaft 8 Ohm Speaker L-Pad Attenuator 100W Mono 1" Shaft 8 Ohm 2
Temporarily out of stock
Resistors

Speaker L-Pad Attenuator 100W Mono 1" Shaft 8 Ohm

PROD409
0 Review(s)
0 pcs.
€ 27.61
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 8 ohm loads, features a 1" shaft length, and comes with mounting hardware.  Highlights Easy level adjustment without changing...
View
Filter by
Manufacturers
Price
€ €
Resistance
more... less
Filter
Product added to wishlist
Product added to compare.

This website use cookies. Click here for more information.