HIVI Q3 Silk dome tweeter
Swans Q3 Hi-end technical parameters
- parameter name symbol value unit of measure
- Basic parameters of the application
- Nominal impedance H 6 Ω
- Resonance frequency Fs 600 Hz
- Rated power Pnom 15 U
- Maximum power Pmax 30 W
- Sensitivity (283V/1m) e. 90 dB
- weight Y 0.64 kilograms
- voice coil
- Voice coil diameter ∅ 28 mm
- DC resistance Re 5.1 Ω
- Voice coil wire High temperature aluminum wire with copper coating
- Voice coil coil High temperature resistant aluminum
- magnetic circuit
- Magnetic circuit type Double magnetic circuit
- high performance ferrite magnetic material
- parameter
- Recommended crossover point >2000Hz
Feature:
Adopting 28mm German soft dome sound membrane and special treatment of the damping layer, the frequency response is wide and flat, and the sound is more transparent and clear. High efficiency ferrite design with dual magnetic circuit, linear and uniform magnetic field and harmonic distortion can be effectively reduced. For lower distortion and better prevention of dynamic compression, improved resonance cavity design, high impedance sound absorbing materials. Professional liquid magnetic cooling technology, high temperature resistant aluminum alloy skeleton and copper-plated aluminum wire voice coil, with high power carrying capacity. Adhering to Hivi's consistent Hi-end concept, the sound is more natural and soft, the transients, texture and resolution are more layered, and the details are rich without unpleasant characteristics.
- Diameter
- 1,1"
- Impedance
- 6 Ω
- Power
- 30 W
- Series
- HIVI Dome
- Material
- Textile
.jpg)

Summary
3
(1 Reviews)
Select a row below to filter reviews.
За жалост не мога да препоръчам тези драйвери. Като цяло, опитът ми с драйвери на HiVi Research е положителен, но тези ми създадоха доста проблеми при изработката на последния ми проект. Първият чифт, който закупих беше с един дефектен (макар и принципно работещ ) драйвер. Установих, че сравнявайки звука на двата драйвера (А/Б тест), единият звучеше осезаемо различно спрямо другия, без дори да бях сложил филтър преди тях. След това измерих импеданса и на двата и установих съществени разминавания между характеристиките на двата - нещо, което не ми се е случвало с други драйвери, или поне не в такава степен. Искам също да уточня, че не съм ги претоварвал с високи мощности. Реших да взема втори чифт и отново имаше дори по-голяма разлика в импеданса. Измерванията ги извършвам с DATS v.3 на Dayton Audio и досега не съм имал такива проблеми. В крайна сметка, използвах по един драйвер от двата чифта със сходни характеристики и съм доволен от резултата, но не и от факта, че трябваше да закупя общо 4.